Teach you understand the characteristics of wear-resistant ceramic tube

Wear-resistant ceramic tube, it is using high technology production process, since the tendril high-temperature clutch synthesis manufacturing, is a kind of ceramic composite pipe. The pipe from inside to outside by the corundum, respectively Ceramic \ steel \ transition layer of three layer, the ceramic layer is above 2200 ℃ high temperature to form dense alumina porcelain (AL2O3), with steel tube forming strong through the transition layer.

composite Tube for give full play to the steel tube high strength, good toughness, impact resistance, good welding performance and corundum porcelain high hardness, high wear resistance, corrosion resistance, good heat resistance, overcomes the low hardness \ steel pipe Poor wear resistance and the characteristics of the ceramic toughness is poor. Therefore, wear-resistant ceramic tube has good wear resistance, heat resistance, corrosion resistance and mechanical impact resistance and thermal shock \ solderability good comprehensive performance.

Is conveying grain material, grinding, corrosive medium, such as the ideal wear-resisting, corrosion resistant pipe. Because the tube is wear-resisting, corrosion resistant, heat resistant performance, thus can be widely used in electric power, metallurgy, mining, coal, chemical and other industries as conveying sand, stone, coal powder, ash \ liquid aluminum and other material grinding particles and corrosive medium, is an ideal abrasion resistant pipe The tao.

Common dust flue pipe wear is a common phenomenon, mainly occurs in the pipeline of local alien artifacts, such as elbow, tee, etc. Straight pipe relative to wear Weak, often appear in the bottom of the pipeline, but have heavy phenomenon, wear in the upper pipe. Wear cause air leakage, systems influence dust source control effect, destroy the dust removal system Can even cause systems;For high gas piping, the wear will make the pipeline strength and stiffness fell sharply, lead to unsafe hidden danger. Therefore, for pipe wear You must give attaches great importance to the harm and prevent. Pipe wear is a solid dust particles velocities caused by scouring. Therefore, to study the wear mechanism and put forward the correspondingWear resistant measures should focus on the analysis of collision behavior of dust particles.

Chemshun company production of wear-resistant ceramic tube USES a high hardness, high strength and alumina corundum ceramics Lining, its surface is smooth, the wearability is outstanding, the service life of more than 200 times is one of the traditional pipe, high temperature ceramic chip off, is the chief drawback of using patent fixed welding way, ceramic chip will not fall off. Wear resistant ceramic pipe can well solve the problem of wear and tear, life expectancy increased to more than 10 years.