1, the wear-resisting ceramics definition and performance characteristics

The definition of wear-resisting ceramics:

Wear-resisting ceramics is AL2O3 as the main raw material, with rare metal oxide as the flux, through one thousand seven hundred baidu high temperature roasting of special alumina ceramic, with special rubber and high intensity of a combination of organic/inorganic adhesive products.

Wear resisting ceramics performance characteristics:

A high hardness

B, excellent wear resistance

C light weight (only half as much as that of the steel can greatly reduce equipment load)

D good adhesion strong, heat-resisting performance (wear-resisting ceramics piece of heat-resisting strong glue to stick on the inner wall of the equipment)

E Wide range of application

Thermal power, steel, metallurgy, machinery, coal, mining, chemical, cement, port terminals and other enterprises of coal transporting system, pulverizing system, ash discharge and dust removal system, etc

All wear large mechanical equipment, can choose according to different requirements of different types of products.

Wear resistant ceramic main technical indicators

Performance conforms to Q/OKVL001-2003 technical standards

Wear-resistant ceramic main technical indicators:

Project indicators

Alumina content of 95% or higher

Acuity 3.5 g/cm3 density

Rockwell hardness acuity 80 HRA

Or higher compressive strength of 850 Mpa

Fracture toughness K Ι acuity 4.8 MPa, m1/2 C

Bending strength p 290 mpa

Coefficient of thermal conductivity of 20 w/m.K

Coefficient of thermal expansion: 7.2 x 10-6 m/m.K

Type adhesive and impact resistant wear resistant ceramic plate with a rubber key performance indicators:

The project name

Breaking strength (Mpa) 12 or more

Pull-apart extension (%) of 250 or higher

Shaw hardness (55-65 degrees)

Pull a permanent deformation (%) 24 or less

Rubber and ceramic bonding strength (Mpa) (shear stress) of 3.0 or higher

The heat resistance of 100 ℃ or less

Rubber aging age 15 years or more

Type heat resistant adhesive wear resistant ceramic plate with a rubber key performance indicators:

The project name

Breaking strength (Mpa) of 7.5 or higher

Pull-apart extension (%) of 300 or higher

Shaw hardness (c) 48-58

Pull a permanent deformation (%) 16 or less

Rubber and ceramic bonding strength (Mpa) (shear stress) of 3.0 or higher

The heat resistance of 250 ℃ or less

Rubber aging age 15 years or more

Hardy type adhesive wear resistant ceramic plate with a rubber key performance indicators:

The project name

Breaking strength (Mpa) 12 or more

Pull-apart extension (%) of 350 or higher

Shaw hardness (c) 48-58

Pull a permanent deformation (%) 24 or less

Rubber and ceramic bonding strength (Mpa) (shear stress) of 3.0 or higher

Heat resistance - 50 ℃ or higher

Rubber aging age 15 years or more