A Case Of Rubber Ceramic Wear Plate Application For Copper Mining 

Copper mining is most common all over the world, especially in Chile,Peru, Indonesia, China, Australia etc.and mostly based on the excavation.Since the copper content in copper is below 1%, the post-processing procedures for copper mining are much more complicated than those for iron ore. First grinding into powder, add water, refueling, flotation method to obtain a higher copper content, and then into the calcining furnace melted into copper, and finally by electrolysis to remove impurities, a purity of 90% Nine nine copper ingots. So during whole delivery process, rubber ceramic wear plate as abrasion resistant materials is much useful to improve production effectively .

A customer from Australia inquiry us for their copper mining system ,he want to ceramic wear liner used for wear resistant materials of estuaries and bunkers, hydro cyclones. We analyze the working environment :the particle size of the material is from 8mm to 28mm ;the flow velocity of the copper ore is 360 t / h;the falling height when material drop off does not exceed 0.5 m; the working temperature is -10 to +40 cent-degree .according to this working system. Chemshun Ceramics suggest him to use rubber ceramic wear plate with size 500*500*30mm vulcanized by square alumina ceramic tile.

Rubber Ceramic wear plate from Chemshun Ceramics manufacturer can be produced with square ceramic mosaic tile,alumina hex tile, ceramic cylinder, ceramic plate etc.welcome to inquiry.