Chemlok Glue for vulcanization (252X)

1: Application?

Widely make all kinds of rubber and metal substrate meterials glued togeter by hot vulcanization .Rubber includes natural rubber, polyisoprene rubber, styrene-butadiene rubber, butadiene rubber, neoprene, nitrile rubber,butyl rubber and EPDM rubber.; substrate: carbon steel. Steel, stainless steel. aluminum. copper. Copper alloys, magnesium and zinc and other metals as well as plastics and textile fibers.

2: Chemlok Glue property:

? ? 1) Appearance : Black liquid

? ? 2) Viscosity: 250 cps (Brookfield LVT, 2 # rotor, 30 rev / min, 25 ℃).?

? ? 3) Solid content: 22.0 to 24.0% (by weight)

? ? 4) Density : 0.953 ~ 0.989

? ? 5) Shelf life: at the end of open container (25 ℃) 12 months

3: Instructions for use

? ? 1) Surface treatment: mechanical method (blasting) degreasing, or chemical treatment.

? ? 2) Dilution: direct coating may be diluted. If the actual operational needs, it ? ?

? ? ? can also be diluted with an appropriate amount of the aforementioned diluent.

? ? 3) Mixing: The thoroughly stirred prior to coating, to achieve uniform mixing before use.

? ? 4) Coating: by brushing or roll coating. Dipping. Transfer method CH252X uniformly coated on the substrate surface metal.

? ? 5) Glue dry film thickness :( dry) 12 ~ 25u, bonding vulcanized rubber?

? ? 6) Drying: drying at room temperature at least 45 minutes

? ? 7) Parking: vulcanization immediately after drying if necessary, it can be parked for a long time, but to avoid contamination.

? ? 8) Cure: Depending on the vulcanization condition of materials