Rubber Ceramic Plates Applied in Transfer Chute [08-08 09:41]

Transfer chute refers to a trough that is usually transported from a high place to a low place on the ground. The inner surface is smooth, and the thing can be automatically slid down (such as the washing of a gold ore-bearing ore tank or a sloping water tank ...

The forming techniques of ceramic grinding media balls [08-07 10:57]

The forming is important for ceramic grinding balls manufacturing process. Chemshun tell you two form techniques include rolling and isostatic pressing.

Wear Resistant Ceramic Knapsack Elbow [07-31 14:10]

Knapsack elbow is also known as reinforced elbow, Elbow part is a serious wear and impact place. Welding a wear part at the serious wear place of elbow called knapsack elbow. Wear-resistant ceramic knapsack elbow has realized double layer anti-wear, which is s

Wear Resistant Ceramic Used In The Cement Industry [07-31 11:03]

Alumina Wear resistant ceramics is belong to non-metallic wear-resistant material, it is made from high-purity 92%, 95% AL2O3 alumina powder, shaped by press through a sintering process on 1550-1700℃, its density is 3.6-3.75g/cm3,the hardness can be HRA80-90

The Design and Manufacture of Wear Resistant Ceramic Pipe [07-30 11:02]

Chemshun wear-resistant alumina ceramic tubes/ pipe is a special kind of wear-resistant pipe. Its design structure is to add a layer of wear-resistant alumina ceramic lining inside the steel pipe. The abrasion resistance and high temperature resistance of Chem

Ceramic Zirconia-Y grinding media CS-60 [07-27 09:04]

Ceramic grinding media is widely apply in mining industry,mineral industry, cement industry, paints industry, inks industry, dyes industry, cosmetic industry, pigment industry as grinding media for ball mill, filling machine and sand mill.Chemshun Ceramics is ...

Ceramic grinding media for mining industry [07-24 10:37]

As the mineral resources are decreasing, the ore with low grade, complex composition, so it is the premise and key of separation that the ore is difficult to mine directly needs to be fine grinding and up to cleavage. Many mining industry production uses ordin...

Why choose the wear resistant ceramic as the lining of pipe and elbows of thermal power plant? [07-22 09:25]

Thermal power plant coal transporting pipeline required the pipes and elbows with the characters of wear-resisting, leakproof, anti-corrosion, high temperature resistance. Preventing wear and abrasion resistance is extremely serious important.Choosing a wear a

How do chemshun control the quality of wear resistant ceramic products? [07-19 14:43]

As a professional manufacturer of wear resistant ceramic products in China,Pingxiang chemshun ceramics co.,ltd.

How do chemshun control the quality of wear resistant ceramic products? [07-19 09:27]

As a professional manufacturer of wear resistant ceramic products in China,Pingxiang chemshun ceramics co.,ltd.

How about the Chemshun wear resistant ceramic? [07-17 08:49]

Pingxiang chemshun ceramics Co., Ltd produced 92% and 95% alumina wear-resistant ceramic with special corundum structure.

How to test Mohs hardness scale of wear resistant ceramics [07-15 10:25]

To be excellent wear abrasion resistance, wear resistant ceramics need have high hardness. And Mohs hardness scale is an international standard to evaluate alumina ceramics’ hardness.It was proposed by the German mineralogist Frederich Mohs in 1824. And ...

How to choose ceramic grinding media for your mill [07-11 16:42]

The output of miner resource has decreased a lot,the inferior quality of ores, the complicated composite of ores,directly ores exploration difficultly,these factors lead to the high requirement  standard of our fine grinding process accurately,generally t...

Wear resistant ceramics is widely applied in steel industry [07-08 11:23]

For steel industry factories, there are 3 difficult problems make them have to frequently shut down their top hopper and coke weighing hopper of the blast furnace to repair it, which means more loss in time and profit. The 3 difficult problems are strong impac...

How to test the wear loss of ceramic grinding media in wet grinding environment? [07-05 15:19]

Testing wear loss character of ceramic grinding media in lab only 6 steps.1st, Putting 4kg ceramic grinding media mill balls and 4L water into a grinding tank, then continuous grinding the balls and water for 2 hours at 80r/min speed. 2nd, Washing the ceramic ...