Application of ceramic cyclone in mining process [12-12 09:58]

Cyclone is a classification equipment commonly used in industrial mineral processing. Although the operation is flexible and convenient, serious problems of wear and tear exist widely in the use process, including the wear of cyclone nozzle, cone, connection p...

The SiSiC Desulfurization Nozzle and Application [11-28 13:54]

Silicon carbide nozzle for desulfurization can serve a long time, about 10~20 times longer than common metal, 4~7 times longer than alumina, especially suitable to serve in harsh conditions for fgd. This kind of silicon carbide nozzle for flue g...

The Technical Date of Recrystallized Silicon Carbide Ceramic Product [11-23 10:36]

PINGXIANG CHEMSHUN CERAMICS CO., LTD Non-metal Area of Shangliuyuan, Economic Development Zone,Pingxiang City,Jiangxi Province, PR China. Zip Code:337000Tel: +86-799-6790781  Fax: +86-799-6790785Website: www.chemshun.com; Email: offfice@chemshun.comC

Reaction Sintered Silicon Carbide (SISIC) Lining Tube [11-21 11:01]

In order to meet different request of client, Pingxiang Chemshun Ceramics CO, Ltd can provide the different wear resistant solution with different material. Besides alumina wear resistant ceramic products, we also have the SIC material as wear resis

Silicon Carbide As Wear Solution Material [11-19 10:11]

Silicon carbide is a kind of wear resistant material that applied in industrial environments such as those found in mining, construction, petrochemical, power generation, and manufacturing operations. Some typical application is as a wear resistant ceramic lin...

Epoxy Resin Adhesive [10-30 11:28]

Epoxy Resin adhesive is an very important material in the fixing process of wear resistant ceramics. Chemshun Ceramics afford all type of adhesives which suitable for different temperature (-60~300 Centigrade degree) and Humidity environment.Performance featur...

Epoxy Resin Glue [10-29 15:05]

As a forerunner of wear resistant ceramic products, we do business with different clients for different requirement. Some clients only place order for ceramic tiles from us, some customers purchase ceramic lined equipment directly, and some of them choose to b

Silicon carbide wear-resistant epoxy ceramic coating [10-23 11:23]

The ceramic coating is made of ingredient A and ingredient B,it contains high-performance wear resistant particles as a protective layer against impact and corrosion. This ceramic coating has good wear resistance and anti-corrosion, it is suitable for operatio

Epoxy resin adhesive for wear-resistant ceramics sticking [10-21 15:00]

Ceramic epoxy resin adhesive: with A and B components, mostly white. After curing performance hard as ceramics, finger touch smooth and solid, not shrink after dry solid. Pingxiang chemshun ceramics supply kinds of Epoxy Resin Adhesive with components A/B=1/1

How to stick wear resistant linings by epoxy resin glue? [10-15 14:43]

Using expoxy resin to stick wear resistant linings on the equipment surface, you have to do these five steps:1. Repire your equipment. Before stick, you need to insure the surface of equipment is smooth and flat. Otherwise, you have to repire the wear surface ...

The ratio of ceramic grinding ball in ball mill of cement plant [09-30 08:52]

As the ceramic ball is used in the fine grinding bin, the gradation method is the same as that of the steel ball in the fine grinding bin. But because its specific gravity is only about one half of the steel ball, so it has higher requirements on the moisture,...

Introduction of vulcanization process used in rubber ceramics [09-27 08:59]

Chemshun rubber ceramics is with high wear resistant ceramics vulcanized in resilient rubber. They possess many benefits including high hardness, superior abrasion and impact resistance corrosion and chemical resistance. Except for the alumina ceramics which a...

How to choose best wear resistant bend pipe liner? [09-25 11:05]

With hard and corrosive material transporting day by day, bend pipe is easy to get wear while there's no protection. So many industries need to install wear liner inside pipe.There mainly are two different types of bend pipe liner including rubber liner, c...

Ceramic Grinding Media-Zirconium Silicate Beads [09-24 11:14]

Zirconium Silicate Beads is a ceramic grinding media which is made through the sintering process and it can be used in stirred vertical mill and horizontal mill.1.Specification of Zirconium Silicate Beads:ItemCS-40MaterialZrO2 ,SiO2, Al2O3Density>4.0g/...

Notice for welding steel pipe lined with wear-resistant alumina ceramic lining [09-23 16:21]

Wear resistant ceramics elbow bend pipe, pipe sleeve is used as composite ceramics pipe lined steel , wildly used in power plant boiler milling system piping. When welding it, you should pay attention to these relevant standards:1. To prevent defects such...